|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Document 284-1 SMT Power Inductors - DO5010H Series * Irms ratings up to 15 A; saturation currents up to 30 A * Heavy gauge wire for low DC resistance Designer's Kit C355 contains 3 of each part Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Terminations RoHS compliant tin-silver over copper. Other terminations available at additional cost. Weight 3.2 - 4.0 g Ambient temperature -40C to +85C with Irms current, +85C to +125C with derated current Storage temperature Component: -40C to +125C. Packaging: -40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 250 per 13 reel Plastic tape: 32 mm wide, 0.38 mm thick, 24 mm pocket spacing, 7.8 mm pocket depth PCB washing Only pure water or alcohol recommended DCR max (mOhm) 2.6 4.0 6.1 8.6 10 14 17 18 26 28 32 47 66 86 130 190 250 380 560 850 1100 1800 SRF typ3 (MHz) 156 100 75 60 55 40 35 35 28 26 20 20 15 9 8 7 6 5 4 3 2.5 2.0 1. When ordering, please specify termination and packaging codes: Part Number1 DO5010H-781ML_ DO5010H-152ML_ DO5010H-222ML_ DO5010H-332ML_ DO5010H-392ML_ DO5010H-472ML_ DO5010H-602ML_ DO5010H-782ML_ DO5010H-103ML_ DO5010H-123ML_ DO5010H-153ML_ DO5010H-223ML_ DO5010H-333ML_ DO5010H-473ML_ DO5010H-683ML_ DO5010H-104ML_ DO5010H-154ML_ DO5010H-224ML_ DO5010H-334ML_ DO5010H-474ML_ DO5010H-684ML_ DO5010H-105ML_ Inductance2 20% (H) 0.78 1.5 2.2 3.3 3.9 4.7 6.0 7.8 10 12 15 22 33 47 68 100 150 220 330 470 680 1000 Isat4 (A) 30 25 20 17 15 13 12 11 10 8.5 8.0 7.0 5.5 4.5 3.5 3.0 2.6 2.4 1.9 1.4 1.2 1.0 Irms5 (A) 15 15 12 10 9.0 8.4 7.5 7.5 6.0 5.2 4.4 3.5 3.0 2.6 2.3 1.8 1.5 1.2 1.0 0.82 0.72 0.56 DO5010H-105MLD Termination: L = RoHS compliant tin-silver over copper. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: D = 13 machine-ready reel. EIA-481 embossed plastic tape. B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter D instead. 2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4284A LCR meter or equivalent. 3. SRF measured using Agilent/HP 8753D network analyzer. 4. DC current at which the inductance drops 10% (typ) from its value without current. 5. Current that causes a 40C temperature rise from 25C ambient. 6. Electrical specifications at 25C. Refer to Doc 362 "Soldering Surface Mount Components" before soldering. Specifications subject to change without notice. Please check our website for latest information. Document 284-1 Revised 10/14/08 (c) Coilcraft, Inc. 2009 Document 284-2 SMT Power Inductors - DO5010H Series Typical L vs Frequency 10000 Typical L vs Current 10000 1000 1000 H 1000 H 1000 Inductance (H) Inductance (H) 100 100 H 100 100 H 10 10 H 10 10 H 1 0.78 H 1 0.78 H 0.1 0.01 0.1 1 10 0.1 0.1 1 10 100 Frequency (MHz) Current (A) Irms Derating 120 110 100 Note 0.500 12,70 Note: Maximum height: 0.315 for -781 to -153 8,00 0.300 for -223 to -683 7,62 0.280 for -104 to -105 7,11 Percent of rated Irms 90 80 70 60 50 40 0.600 max 15,24 0.730 max 18,54 0.561 min 14,25 0.075 1,90 0.250 6,35 0.200 max 5,08 0.626 15,90 25C 30 20 10 0 -40 -20 0 20 0.065 max 1,65 0.710 max 18,03 Recommended Land Pattern Dash number Internal code 40 60 80 100 120 140 Ambient temperature (C) XXX Part Marking Part marking since Feb. 2005. Parts manufactured prior to that date may have color dots. Visit www.coilcraft.com/colrpowr.cfm for details. X Dimensions are in inches mm Specifications subject to change without notice. Please check our website for latest information. Document 284-2 Revised 10/14/08 (c) Coilcraft, Inc. 2009 |
Price & Availability of DO5010H-103ML |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |